High pressure•bulk flux, high efficiency, low noise, low heat - High Pressure, High Efficiency, Low Noise & Low Heat

High torque and high tensile brass journal bearing type - High tensile brass increases the durability of abrasion.

Circuit composition for the prevention of shocks in case of the F.C.O. (full cut-off) operation

Spherical cylinder block, plate and return guide – high torque • high load, good for the outflow rate and the increase of the controlling capability by the influx of the discharge pressure

High Pressure & Flow

Low Pressure Drop

Stability

It is available to control the 2 solenoid valves independently
(A, B Channels) - Two independent operable amplifier

Setting the parameter through the software and the use of the serial interface (RS-232C) - Parametering by serial interface RS-232C

It is available to control the movement speed on each channel (Ramp Up/Down) - Two Up/Down ramp functions EFBG/EBG/EDG & Other MAKER Proportional Valve Verification of the compatibility

High efficiency and saving energy – The variable vane pump has low heat and high efficiency with the decrease of the external drain and the optimization of the pressure balance.

Light weight and small size – It is an all-in-one system with the pump and the motor, so it is easy to carry the unit due to the compact plan, and has a wide range of the usage.

Low noise and long lifespan life-cycle – The connection portion of the pump and the motor is a joint, so it does not get affected by the differences of the axis vibration and the shaft center. For the reasons, it makes low noise. Moreover, it has the structure with the lubrication on the connection portion all the time, so it has a long lifespan life-cycleb without abrasion on the axis.

High efficiency, Low Noise & Low Heat

It is available to combine and use with the pilot relief valve and the exclusive multi-stage pressure controlling valve

As we control the pilot pressure, it is available to control the full cut-off pressure remotely

High efficiency, Low Noise & Low Heat

It is available to provide the side port type of optional specification followed by the standard specification, axial port type

It is available for the selective application of the hydraulic system composition through the various changes of the attachment port.